Bah yet wont start problem

the sheeep · February 07, 2004, 15:59 hrs

umm yeah i turned it off, turned it on, and then it wont start... i got an error message "overclocking failed"... what should i do?

the sheeep · February 07, 2004, 16:16 hrs

nevermind somehow its working...

but all i did was take out the usb card reader and usb wireless adapter cables and now its good?

is there a reason for this

Chandler · February 07, 2004, 16:17 hrs

USB doesn't work on overclocked busses.

the sheeep · February 08, 2004, 00:24 hrs

OHHHHHHHHHHHH so i should?

Rick G · February 08, 2004, 01:47 hrs

Have to know what all is in your system, but mine is seriously o/c'd and all usb works fine. I have heard of problems with wireless. Try reconnecting evrything except wireless card and see if it works.

the sheeep · February 08, 2004, 12:18 hrs

i know have it down to a simple answer... dont ever turn off computer cause its working fine :D

Chandler · February 08, 2004, 12:20 hrs

Quote from: Rick G on February 08, 2004, 01:47 hrs
Have to know what all is in your system, but mine is seriously o/c'd and all usb works fine. I have heard of problems with wireless. Try reconnecting evrything except wireless card and see if it works.

If you overclock with multipliers then that's OK, but if you overclock by raising the FSB, AND if this takes the PCI bus out of spec (over 33MHz) then USB will likely fail, or give various errors.

Rick G · February 08, 2004, 12:50 hrs

Right on! AGP/PCI locked at 33, vcore and dvolt and fsb increased.

News:

Bah yet wont start problem